Magnetic field meter 3D (XYZ) for 1 nT - 19.99 µT
Electric field meter (Y) for 0.1 - 1999 V / m
5 Hz - 400 kHz and 6 different frequency filters
Built-in logger 4-channel 4GB 10 values / sec
Weight 560g, dimensions 230x77x37 incl. Yellow rubber protection
Switches for RMS and peek allow fields from dirty electricity to be measured with the new peek function and with the frequency filter set at over 2 kHz.
Built-in 4-channel logger with removable 4 GB SDHC memory card for XYZ + optional internal (electric field) or external signal (eg value from HF59B) + Audio recording. USB cable is available as an option.
XYZ can, if desired, be measured separately and LEDs tell which ones are active and which ones are dominant.
PC software included.
Case K5 and earthing cable for potential in electric field measurement.
Internal Li-Ion Accumulator battery for 36-48 hours. The charger is used for long-term logging.
Frequency filter: 16.6 | 50/60 | 100/120 | 150/180 | Rest <2kHz | > 2kHz 1 of 6 can be selected or above or below 2kHz for measurement in band 1 or band 2 or all frequencies. LEDs tell which frequencies are measured (green) and which of six is dominant (red) and which is two (yellow).
Signal switch for tRMS / hold and Peak / hold (hold locks the display at the highest value).
Sensors for static electric and magnetic fields.
Plug-in TCO disc 30cm for measuring electric fields,
Hand sensor for voltage measurement 1mV - 20V acc. SBM2008