3D Electrosmog Measuring Kit "Professional" MK70-3D plus 2.2

€7 995Excluding VAT
Available
0-2 weeks delivery time
Only a few left (0 items)
0-2 weeks delivery time
Product reminder

Enter your e-mail address below and we will notify you when the product is available! Your e-mail address will be stored up to 180 days.

Product Description:

Our top devices for dedicated building biologists

Leaves nothing to be desired! This kit is chosen every year by a large number of newly trained building biologists worldwide as the basis for their professional measuring equipment. It offers the largest possible frequency coverage (future-proof also with regard to radar and the area-wide 5G), and the deepest analysis possibilities (dirty power, uninterrupted long-term recording, etc.). Its scope of functions and equipment is tailored to the practical needs of building biology.


HFE59B

  • Radio and microwave meter 27-3300 MHz, optimized for GSM, UMTS (3G), 4G, DECT, WLAN etc.
  • Rechargeable battery with charger.
  • AC output intended for audio analysis of the modulation frequency
  • DC output intended for logging the radiation intensity
  • Measures any pulsed or continuous + pulsed radiation
  • Finds the transmitter at 10 degrees when.
  • Highest accuracy ± 3 dB
  • Frequency range 27 - 3300 MHz measuring instrument
  • Frequency range 800 - 3000 MHz included log. Periodic antenna
  • Switches for higher accuracy in radar and UMTS peak value measurements.
  • Top value memory
  • Sensitivity range 0.01 µW / m² - 19.99 mW / m²
  • Swedish and english manual
  • Accessories included HFE59B:
  • Amplifier HV10_27G3 for measuring radiation weaker than 0.02 µW / m², measures down to 0.4 nW / m²
  • Attenuator DG20_G3 for measuring radiation stronger than 20,000 µW / m², measures up to 2 W / m²
  • HP800_G3 high-pass filter 800 MHz, ie blocks frequencies below 800 MHz, only higher frequencies pass.
  • UBB27 Quasi-isotropic antenna (not directional in the horizontal plane) for the entire frequency range 27-3000 MHz
  • FF10
  • Now you have the opportunity to measure only one system. Set it to e.g. UMTS / 3G and only that signal passes through, other frequencies are attenuated by 50-60 dB.
  • The filter can be used together with other amplifiers and attenuators etc.
  • The filter is mounted between the antenna and the instrument. There are 11 different modes:
  • Allpass / low pass 480 MHz / TETRA / LTE800 / GSM900 / GSM / LTE1800 / DECT / UMTS / LTE2600 / WLAN.

 

HFW59D

  • Microwave meters for WLAN, Bluotooth, 4G etc. measures from 2.4 to 10 GHz
  • For frequencies for wireless transmission including the new standard for Bluetooth, WLAN, WiFi and WIMAX.
  • With a specially tuned LogPer antenna (patented).
  • DC output for logging
  • HV20_2400G10 Amplifier 20dB (100 times)
  • Mobile and DECT frequencies are prevented with a steep high-pass filter for an error-free analysis of the frequency range 2.4 - 10 GHz.
  • A good complement to Gigahertz Solutions' other range.
  • Switchable measuring range 0.1 - 199.9 µW / m² or 1 - 1999 µW / m². Corresponds to 0.006 - 0.868 V / m
  • Display is done with digital display.
  • Sound analysis of pulsed radiation sources with speakers and volume control.
  • Switchable to optionally measure peak value or average value.

 

NFA1000

  • With 3D electric field measurement, neither the body nor protective earth is used as a measurement reference, you can now measure the actual electric field without affecting it yourself. If you want, you can also make simpler electric field measurements as before with or without a ground wire.
  • With 3D magnetic field measurement, you get the right value no matter how you direct the instrument. LEDs show which direction is dominant.
  • Fields from dirty electricity can be easily measured with the new peek function and with the frequency filter set at over 2 kHz.
  • Built-in 4-channel logger with removable 4 GB SDHC memory card for XYZ + optional internal or external signal (eg value from HF59B) + Audio recording.
  • Sampling speed of up to 110,000 values ​​per second provides with the PC the program that is included: Analysis of dirty electricity such as µT / s etc. USB connection available.
  • FFT analysis is not included, valid until further notice.
  • Frequency range 5 Hz - 1 MHz
  • Sensitivity 1 nT - 19.99 µT and 0.1 - 1999 V / m
  • Internal Li-Ion Accumulator battery for 36-48 hours.
  • Frequency filter: 16.6 | 50/60 | 100/120 | 150/180 | Rest <2kHz | > 2kHz
  • TCO3 E-field probe


Produced by: Wikinggruppen

The product has been added to your cart